PowerBox Mercury SRS + LCD


Nr katalogowy: 4120 ·

1755.00PLN

Cechy produktu

  • Integral iGyro: Triple-axis gyro system with attitude assist function
  • Expanded setup assistant for ultra-simple operation
  • Special regulatory algorithm for fixed-wing model aircraft
  • Six independent gyro outputs for: 2 x ailerons, 2 x elevators, 2 x rudders
  • Special thrust vector support
  • GPS-regulated gyro gain
  • Extremely accurate six-axis MEMS sensor
  • Integral Delta and V-tail mixer
  • Door sequencer: freely programmable outputs with set-up assistant
  • Servo-Match function: servo centre, end-points and reverse for all 15 servo outputs
  • SRS: Serial Receiver System provides the facility to use receivers with serial interface: Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti UDI, Multiplex M-Link, HoTT and JR X-BUS
  • Unrestricted channel assignment for all 15 PowerBox outputs
  • Graphic OLED screen with 128 x 64 pixels
  • Extremely user-friendly menu-based programming using the SensorSwitch
  • 15 channels
  • Signal amplification and interference suppression for all 15 outputs
  • Flight recorder, recording of lost frames and fail-safe events
  • Variable frame rate, range 12ms – 21ms
  • 16-bit processors for fast, high-resolution signal processing
  • Double-regulated output voltages for receivers and servos
  • regulated output voltage 5.9V or 7.4V
  • Connection facilities for Futaba, Jeti, Spektrum, HoTT, JR and Multiplex MSB downlink bus systems
  • Direct transmission of the battery informations, receiver data and GPS data to the transmitter
  • Separate voltage display for each battery
  • Minimum value memory alerts the user to voltage collapses
  • Large-area heat-sinks for high regulator performance
  • Regulator monitoring, regulator error indicator
  • Support for three battery types: LiPo/LiIon, NiMh/NiCd, LiFePo
  • Suppression of any servo feedback currents which may occur
  • Updateable with PowerBox Systems USB Interface or BlueCom adapter
 

Dane techniczne

Operating voltage 4.0V - 9.0V
Power supply 2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 99mA (with OLED)
Current drain Standby 3µA
Maximum load current Peak 2x20A
Drop-out voltage 0.3V
Output voltage 5.9V or 7.4V regulated
Signal input serial
Supported RC systems Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Receiver redundancy SRS
Channels 15 (18)
Servo sockets 15
Programmable servo outputs 15
Servo signal resolution 0.5µs
Signal frame rate 12ms, 15ms, 18ms, 21ms
Integral gyro system iGyro
Gyro regulation Attitude assist and Normalmode
Gyro sensor type MEMS
Number of sensor axes 6
Screen OLED
Integral door sequencer yes
Supported telemetry systems Jeti, Futaba, Spektrum, HoTT, M-Link, JR Propo
Dimensions 93 x 67 x 19 mm
Weight 85g
Weight Sensor Switch 15g
Weight of LCD screen 15g
Temperature range -30°C bis +75°C

 

26031_4110_01_Mercury_SRS_Hauptbild.jpg 26030_featureicon-serialreceiversystem.png